sevagjb · Nov 8, 2026 · Nov 7, 2026 · Nov 7, 2026 · Nov 7, 2026 · Nov 8, 2026
diff --git a/CHANGELOG.ar.md b/CHANGELOG.ar.md
@@ -1,5 +1,20 @@
 # سجل التغييرات
 
+## 0.30.0
+- **اختر أزرار شريط الأدوات** (**الإعدادات ← شريط الأدوات**، أو **☰ ← تخصيص شريط الأدوات…** أو النقر
+  بالزر الأيمن على شريط الأدوات): أخفِ الأزرار التي لا تستخدمها: الرئيسية، فتح، فحص، العرض، قياس، لقطة
+  شاشة، السمة والإعدادات. وتبقى دائماً القائمة **☰** والفتح في برنامج التقطيع وتصدير STL واللوحة
+  وملاءمة. لا يتغيّر الترتيب أبداً، وتحتفظ الأزرار المخفية باختصاراتها، وصارت القائمة **☰** تضم أيضاً
+  فحص والعرض وقياس وقائمة السمة. [شاهده أثناء العمل](https://sevagjb.github.io/PrintView3D/ar/use.html#toolbar-buttons).
+- **أزرار عرض أقصر** (في الصفحة نفسها): اعرض اللوحة وفحص والعرض وقياس وملاءمة بصيغة *اللوحة (P)* أو
+  *اللوحة* أو *P* أو الأيقونات فقط، واضممها في مجموعة واحدة متصلة إن شئت. يظهر كل تغيير فوراً؛ **موافق**
+  يحتفظ به و**إلغاء** يعيد ما كان.
+- **تضيء أزرار شريط الأدوات تحت الماوس**: يمتلئ المربع بلون السمة الرئيسي (الكهرماني في Ember، والفيروزي
+  في السمات الأخرى)، مثل مكعب العرض. وأصبحت أيقونة ترس الإعدادات برتقالية في Ember، مثل لقطة الشاشة
+  والسمة بجانبها.
+- **الموقع**: تتبع لقطات الشاشة سمة الموقع (فاتح أو داكن أو Ember).
+- **تحت الغطاء**: أُزيلت شيفرة غير مستخدمة.
+
 ## 0.29.1
 - **مُصلح**: في **فحص النموذج**، كانت الأجزاء المتدلية المخفية داخل النموذج أو تحته تظهر من خلاله، وأكثر
   من ذلك على بعض بطاقات الرسوميات. ومن الأسفل تُلوَّن تماماً كما كانت.

diff --git a/CHANGELOG.md b/CHANGELOG.md
@@ -1,5 +1,20 @@
 # Changelog
 
+## 0.30.0
+- **Choose your toolbar** (**Settings → Toolbar**, also **☰ → Customize toolbar…** or a right-click on
+  the toolbar): hide the buttons you don't use: Home, Open, Check, View, Measure, Screenshot, Theme
+  and Settings. The **☰** menu, Open in slicer, Export STL, Plate and Fit always stay. The order never
+  changes, hidden buttons keep their keys, and the **☰** menu now also has Check, View, Measure and
+  the Theme menu. [See it in action](https://sevagjb.github.io/PrintView3D/use.html#toolbar-buttons).
+- **Shorter view buttons** (same page): show Plate, Check, View, Measure and Fit as *Plate (P)*,
+  *Plate*, *P* or icons only, and join them into one connected group if you like. Every change shows
+  right away; OK keeps it, Cancel goes back.
+- **Toolbar buttons light up under the mouse**: the tile fills with the theme's main colour (amber in
+  Ember, teal in the other themes), like the view cube. The Settings gear is now orange in Ember, like
+  Screenshot and Theme beside it.
+- **Website**: the screenshots follow the website's theme (Light, Dark or Ember).
+- **Under the hood**: unused code removed.
+
 ## 0.29.1
 - **Fixed**: in **Check model**, overhangs hidden inside or under the model could show through it,
   more on some graphics cards. From below they are coloured exactly as before.

diff --git a/CHANGELOG.nl.md b/CHANGELOG.nl.md
@@ -1,5 +1,21 @@
 # Changelog
 
+## 0.30.0
+- **Kies je werkbalk** (**Instellingen → Werkbalk**, ook **☰ → Werkbalk aanpassen…** of klik met rechts
+  op de werkbalk): verberg de knoppen die je niet gebruikt: Start, Openen, Controleren, Weergave,
+  Meten, Schermafbeelding, Thema en Instellingen. Het **☰**-menu, Openen in slicer, STL exporteren,
+  Plaat en Passend blijven altijd staan. De volgorde verandert nooit, verborgen knoppen houden hun
+  toets, en het **☰**-menu heeft nu ook Controleren, Weergave, Meten en het themamenu.
+  [Bekijk hoe het werkt](https://sevagjb.github.io/PrintView3D/nl/use.html#toolbar-buttons).
+- **Kortere weergaveknoppen** (zelfde pagina): toon Plaat, Controleren, Weergave, Meten en Passend als
+  *Plaat (P)*, *Plaat*, *P* of alleen pictogrammen, en voeg ze desgewenst samen tot één aaneengesloten
+  groep. Elke wijziging is meteen te zien; **OK** houdt hem, **Annuleren** gaat terug.
+- **Werkbalkknoppen lichten op onder de muis**: het vlak vult zich met de hoofdkleur van het thema
+  (amber in Ember, cyaan in de andere thema's), net als de weergavekubus. Het tandwiel van Instellingen
+  is nu oranje in Ember, net als Schermafbeelding en Thema ernaast.
+- **Website**: de schermafbeeldingen volgen het thema van de website (Licht, Donker of Ember).
+- **Onder de motorkap**: ongebruikte code verwijderd.
+
 ## 0.29.1
 - **Opgelost**: bij **Model controleren** konden overhangen die in of onder het model verborgen zitten
   erdoorheen zichtbaar zijn, op sommige grafische kaarten meer dan op andere. Van onderen worden ze

diff --git a/README.md b/README.md
@@ -57,6 +57,7 @@ without exporting an STL first.
 | **One window** | A file you double-click while PrintView3D is open is shown in that window, instead of opening another one. Prefer a window per file? **Settings → Files → Open each file in a new window**. |
 | **Look inside** | **View** → wireframe, X-ray (see-through), clip from the top with a height slider and a cut that faces you as you turn the view, on their own or both at once, with the cut-away part as a see-through ghost, to check meshes, hidden parts and hollow walls. **Measure** distances, angles and circles. [Details](#view-wireframe-x-ray-and-clip). |
 | **Check before printing** | **Check** → overhangs, thin walls, holes, tangled (non-manifold) edges, inside-out faces and loose parts, coloured on the model with a count for each. [Details](#check-before-printing). |
+| **Your toolbar** | Hide the buttons you don't use, shorten the view buttons to a name, a key or an icon, and join them into one group (**Settings → Toolbar**). Hidden buttons keep their keys and stay in the **☰** menu. [Details](#toolbar-buttons). |
 | **Comfortable to use** | Slicer-style camera, drag & drop, recent files, open a whole folder, screenshots, millimetres or inches, and keyboard shortcuts you can change. |
 
 <table>
@@ -586,6 +587,28 @@ effect itself and shows a plain colour while the window is not active, and switc
 *Transparency effects* off in Windows Settings or in battery saver. Windows 10 and other systems
 keep the normal look.
 
+### Toolbar buttons
+
+**Settings → Toolbar** (also **☰ → Customize toolbar…**, or right-click the toolbar) chooses which
+buttons the toolbar shows, for a calmer toolbar if you don't use every feature:
+
+- **Can be hidden:** Home, Open, Check, View, Measure, Screenshot, Theme and Settings.
+- **Always shown:** the **☰** menu, Open in slicer, Export STL (3MF and CAD files), Plate and Fit.
+- **The order never changes.** A hidden button only leaves the toolbar; Plate stays the first of the
+  view buttons and Fit the last.
+- **Nothing gets lost.** A hidden button keeps its key (`C`, `V`, `M`, `Ctrl+W`, …), and the **☰**
+  menu has everything, including Check, View, Measure and the Theme menu.
+
+Under **Look** you choose how the view buttons (Plate, Check, View, Measure and Fit) are labelled:
+**icon, name and key** (*Plate (P)*, the default), **icon and name** (*Plate*), **icon and key**
+(*P*) or **icon only** (the tooltip names it). **Join the view buttons into one group** draws them
+as one connected bar.
+
+![Settings → Toolbar: buttons switched off, shorter labels and a joined group, shown live on the toolbar](docs/assets/toolbar-settings.gif)
+
+Every change shows in the window, and in the picture at the top of the page, right away: **OK**
+keeps it, **Cancel** goes back. **Reset to defaults** shows every button again.
+
 ### Updates
 
 **Settings → Updates** shows your version and has **Check for updates now**. You can also switch on

diff --git a/docs/assets/extra.css b/docs/assets/extra.css
@@ -97,3 +97,12 @@
 [data-md-color-scheme="ember"] .md-nav__link--active code { color: var(--pv-ember-teal-deep); }
 /* Tables: header row in the window colour. */
 [data-md-color-scheme="ember"] .md-typeset table:not([class]) th { background-color: var(--pv-ember-window); }
+
+/* ---------------------------------------------------------------- pictures that match the theme
+   tools/mkdocs_theme_images.py puts a Light and an Ember version beside each screenshot that has
+   them: only the one for the chosen theme shows (Dark: the original picture). */
+img.pv-theme-light, img.pv-theme-ember { display: none; }
+[data-md-color-scheme="default"] img.pv-theme-dark,
+[data-md-color-scheme="ember"] img.pv-theme-dark { display: none; }
+[data-md-color-scheme="default"] img.pv-theme-light,
+[data-md-color-scheme="ember"] img.pv-theme-ember { display: inline; }
diff --git a/docs/assets/inside/check--ember.webp b/docs/assets/inside/check--ember.webp
diff --git a/docs/assets/inside/check--light.webp b/docs/assets/inside/check--light.webp
diff --git a/docs/assets/inside/check-ar--ember.webp b/docs/assets/inside/check-ar--ember.webp
diff --git a/docs/assets/inside/check-ar--light.webp b/docs/assets/inside/check-ar--light.webp
diff --git a/docs/assets/inside/check-nl--ember.webp b/docs/assets/inside/check-nl--ember.webp
diff --git a/docs/assets/inside/check-nl--light.webp b/docs/assets/inside/check-nl--light.webp
diff --git a/docs/assets/inside/clip-facing--ember.webp b/docs/assets/inside/clip-facing--ember.webp
diff --git a/docs/assets/inside/clip-facing--light.webp b/docs/assets/inside/clip-facing--light.webp
diff --git a/docs/assets/inside/clip-facing-ar--ember.webp b/docs/assets/inside/clip-facing-ar--ember.webp
diff --git a/docs/assets/inside/clip-facing-ar--light.webp b/docs/assets/inside/clip-facing-ar--light.webp
diff --git a/docs/assets/inside/clip-facing-nl--ember.webp b/docs/assets/inside/clip-facing-nl--ember.webp
diff --git a/docs/assets/inside/clip-facing-nl--light.webp b/docs/assets/inside/clip-facing-nl--light.webp
diff --git a/docs/assets/inside/colors--ember.webp b/docs/assets/inside/colors--ember.webp
diff --git a/docs/assets/inside/colors--light.webp b/docs/assets/inside/colors--light.webp
diff --git a/docs/assets/inside/colors-ar--ember.webp b/docs/assets/inside/colors-ar--ember.webp
diff --git a/docs/assets/inside/colors-ar--light.webp b/docs/assets/inside/colors-ar--light.webp
diff --git a/docs/assets/inside/colors-nl--ember.webp b/docs/assets/inside/colors-nl--ember.webp
diff --git a/docs/assets/inside/colors-nl--light.webp b/docs/assets/inside/colors-nl--light.webp
diff --git a/docs/assets/inside/grid-numbers--ember.webp b/docs/assets/inside/grid-numbers--ember.webp
diff --git a/docs/assets/inside/grid-numbers--light.webp b/docs/assets/inside/grid-numbers--light.webp
diff --git a/docs/assets/inside/measure--ember.webp b/docs/assets/inside/measure--ember.webp
diff --git a/docs/assets/inside/measure--light.webp b/docs/assets/inside/measure--light.webp
diff --git a/docs/assets/inside/measure-ar--ember.webp b/docs/assets/inside/measure-ar--ember.webp
diff --git a/docs/assets/inside/measure-ar--light.webp b/docs/assets/inside/measure-ar--light.webp
diff --git a/docs/assets/inside/measure-cut--ember.webp b/docs/assets/inside/measure-cut--ember.webp
diff --git a/docs/assets/inside/measure-cut--light.webp b/docs/assets/inside/measure-cut--light.webp
diff --git a/docs/assets/inside/measure-cut-ar--ember.webp b/docs/assets/inside/measure-cut-ar--ember.webp
diff --git a/docs/assets/inside/measure-cut-ar--light.webp b/docs/assets/inside/measure-cut-ar--light.webp
diff --git a/docs/assets/inside/measure-cut-nl--ember.webp b/docs/assets/inside/measure-cut-nl--ember.webp
diff --git a/docs/assets/inside/measure-cut-nl--light.webp b/docs/assets/inside/measure-cut-nl--light.webp
diff --git a/docs/assets/inside/measure-nl--ember.webp b/docs/assets/inside/measure-nl--ember.webp
diff --git a/docs/assets/inside/measure-nl--light.webp b/docs/assets/inside/measure-nl--light.webp
diff --git a/docs/assets/inside/objects--ember.webp b/docs/assets/inside/objects--ember.webp
diff --git a/docs/assets/inside/objects--light.webp b/docs/assets/inside/objects--light.webp
diff --git a/docs/assets/inside/objects-ar--ember.webp b/docs/assets/inside/objects-ar--ember.webp
diff --git a/docs/assets/inside/objects-ar--light.webp b/docs/assets/inside/objects-ar--light.webp
diff --git a/docs/assets/inside/objects-nl--ember.webp b/docs/assets/inside/objects-nl--ember.webp
diff --git a/docs/assets/inside/objects-nl--light.webp b/docs/assets/inside/objects-nl--light.webp
diff --git a/docs/assets/inside/xray-clip--ember.webp b/docs/assets/inside/xray-clip--ember.webp
diff --git a/docs/assets/inside/xray-clip--light.webp b/docs/assets/inside/xray-clip--light.webp
diff --git a/docs/assets/inside/xray-clip-ar--ember.webp b/docs/assets/inside/xray-clip-ar--ember.webp
diff --git a/docs/assets/inside/xray-clip-ar--light.webp b/docs/assets/inside/xray-clip-ar--light.webp
diff --git a/docs/assets/inside/xray-clip-nl--ember.webp b/docs/assets/inside/xray-clip-nl--ember.webp
diff --git a/docs/assets/inside/xray-clip-nl--light.webp b/docs/assets/inside/xray-clip-nl--light.webp
diff --git a/docs/assets/toolbar-settings.gif b/docs/assets/toolbar-settings.gif
diff --git a/docs/index.ar.md b/docs/index.ar.md
@@ -21,7 +21,13 @@ hide:
 بنقرة واحدة. تصمّم في FreeCAD؟ افتح ملف `.FCStd` وأرسله إلى برنامج التقطيع كنموذج مباشرةً، دون تصدير
 ملف STL أولًا.
 
-## جديد: الفحص والقياس والنظر داخل نماذجك
+## جديد: شريط أدواتك، والفحص والقياس والنظر داخل نماذجك
+
+**جديد في 0.30: شريط أدواتك أنت.** أخفِ الأزرار التي لا تستخدمها، واختصر أزرار العرض إلى اسم أو
+اختصار أو أيقونة، واضممها في مجموعة واحدة. تحتفظ الأزرار المخفية باختصاراتها، ويبقى كل شيء في القائمة
+**☰**. [كيف يعمل](use.md#toolbar-buttons)
+
+![الإعدادات ← شريط الأدوات: أزرار مخفية وتسميات أقصر ومجموعة متصلة، تظهر فوراً على شريط الأدوات](assets/toolbar-settings.gif)
 
 **جديد في 0.29: الفحص قبل الطباعة.** نقرة واحدة تلوّن ما قد يسبب مشكلات عند الطباعة: الأجزاء
 المتدلية، والجدران الأرق من فوهتك، والثقوب، والحواف المتشابكة، والأوجه المعكوسة، والأجزاء المنفصلة، مع
@@ -63,6 +69,7 @@ hide:
 | **الصور المصغّرة** | يعرض مستكشف الملفات في Windows معاينات لملفات 3MF وSTL وG-code وFreeCAD (تُثبَّت مع PrintView3D، اختيارية). وعلى macOS (تجريبي) يعرض Finder صوراً مصغّرة لملفات 3MF وSTL وG-code وFreeCAD وOBJ وPLY، ويعرض **Quick Look** (مفتاح المسافة) نماذج STL و3MF وOBJ وPLY بشكل ثلاثي الأبعاد. [التفاصيل](install.md#quick-look). |
 | **التحديثات** | **التحقق من التحديثات** من الإعدادات، أو مرة يوميًا إذا سمحت بذلك. على Windows تقوم نقرة واحدة بتنزيل الإصدار الجديد والتحقق منه وتثبيته. يظهر بجانب رقم الإصدار في الزاوية نقطة حمراء عند توفر تحديث. [ما الذي يُرسَل](use.md#updates-and-privacy). |
 | **نافذة واحدة** | الملف الذي تنقر عليه نقرًا مزدوجًا أثناء فتح PrintView3D يظهر في النافذة نفسها بدل فتح نافذة أخرى. تفضّل نافذة لكل ملف؟ **الإعدادات ← الملفات ← فتح كل ملف في نافذة جديدة**. |
+| **شريط أدواتك** | أخفِ الأزرار التي لا تستخدمها، واختصر أزرار العرض إلى اسم أو اختصار أو أيقونة، واضممها في مجموعة واحدة (**الإعدادات ← شريط الأدوات**). تحتفظ الأزرار المخفية باختصاراتها وتبقى في القائمة **☰**. [التفاصيل](use.md#toolbar-buttons). |
 | **سهل الاستخدام** | كاميرا بأسلوب برامج التقطيع، والسحب والإفلات، والملفات الأخيرة، ولقطات الشاشة. |
 
 <table>

diff --git a/docs/index.md b/docs/index.md
@@ -21,7 +21,13 @@ file to Creality Print, OrcaSlicer, Bambu Studio, PrusaSlicer, Cura and others w
 Designing in FreeCAD? Open the `.FCStd` file and send it to your slicer as a model directly,
 without exporting an STL first.
 
-## New: check, measure and look inside your models
+## New: your own toolbar, check, measure and look inside
+
+**New in 0.30: your own toolbar.** Hide the buttons you don't use, shorten the view buttons to a
+name, a key or an icon, and join them into one group. Hidden buttons keep their keys, and everything
+stays in the **☰** menu. [How it works](use.md#toolbar-buttons)
+
+![Settings → Toolbar: buttons switched off, shorter labels and a joined group, shown live on the toolbar](assets/toolbar-settings.gif)
 
 **New in 0.29: Check before printing.** One click colours what may give trouble when you print:
 overhangs, walls thinner than your nozzle, holes, tangled edges, inside-out faces and loose parts,
@@ -65,6 +71,7 @@ each object a colour of your own, and see the size of every object.
 | **Thumbnails** | Windows File Explorer shows previews of 3MF, STL, G-code and FreeCAD files (installed with PrintView3D, optional). On macOS (beta), Finder shows thumbnails of 3MF, STL, G-code, FreeCAD, OBJ and PLY files, and **Quick Look** (space bar) shows STL, 3MF, OBJ and PLY models in 3D. [Details](install.md#quick-look). |
 | **Updates** | **Check for updates** in Settings, or once a day if you allow it. On Windows one click downloads, checks and installs the new version. The version in the corner gets a red dot when an update is ready. [What is sent](use.md#updates-and-privacy). |
 | **One window** | A file you double-click while PrintView3D is open is shown in that window, instead of opening another one. Prefer a window per file? **Settings → Files → Open each file in a new window**. |
+| **Your toolbar** | Hide the buttons you don't use, shorten the view buttons to a name, a key or an icon, and join them into one group (**Settings → Toolbar**). Hidden buttons keep their keys and stay in the **☰** menu. [Details](use.md#toolbar-buttons). |
 | **Comfortable to use** | Slicer-style camera, drag & drop, recent files, screenshots. |
 
 <table>

diff --git a/docs/index.nl.md b/docs/index.nl.md
@@ -21,7 +21,13 @@ printtijd en het filamentverbruik, en stuurt het bestand met één klik naar Cre
 Bambu Studio, PrusaSlicer, Cura en andere. Ontwerp je in FreeCAD? Open het `.FCStd`-bestand en stuur het
 direct als model naar je slicer, zonder eerst een STL te exporteren.
 
-## Nieuw: controleren, meten en in je modellen kijken
+## Nieuw: je eigen werkbalk, controleren, meten en in je modellen kijken
+
+**Nieuw in 0.30: je eigen werkbalk.** Verberg de knoppen die je niet gebruikt, maak de weergaveknoppen
+korter tot een naam, een toets of een pictogram, en voeg ze samen tot één groep. Verborgen knoppen
+houden hun toets, en alles blijft in het **☰**-menu. [Hoe het werkt](use.md#toolbar-buttons)
+
+![Instellingen → Werkbalk: knoppen uit, kortere namen en een samengevoegde groep, meteen te zien op de werkbalk](assets/toolbar-settings.gif)
 
 **Nieuw in 0.29: Controleren voor het printen.** Eén klik kleurt wat bij het printen problemen kan
 geven: overhangen, wanden dunner dan je nozzle, gaten, verwarde randen, binnenstebuiten gekeerde
@@ -66,6 +72,7 @@ doorzichtige schim. Maak het doorzichtig, geef elk object een eigen kleur en zie
 | **Miniaturen** | Windows Verkenner toont voorbeelden van 3MF-, STL-, G-code- en FreeCAD-bestanden (geïnstalleerd met PrintView3D, optioneel). Op macOS (bèta) toont de Finder miniaturen van 3MF-, STL-, G-code-, FreeCAD-, OBJ- en PLY-bestanden, en **Quick Look** (spatiebalk) toont STL-, 3MF-, OBJ- en PLY-modellen in 3D. [Details](install.md#quick-look). |
 | **Updates** | **Controleren op updates** in Instellingen, of één keer per dag als je dat toestaat. Op Windows downloadt, controleert en installeert één klik de nieuwe versie. De versie in de hoek krijgt een rode stip als er een update klaarstaat. [Wat er verstuurd wordt](use.md#updates-and-privacy). |
 | **Eén venster** | Een bestand waarop je dubbelklikt terwijl PrintView3D open is, verschijnt in dat venster in plaats van in een nieuw venster. Liever een venster per bestand? **Instellingen → Bestanden → Elk bestand in een nieuw venster openen**. |
+| **Je eigen werkbalk** | Verberg de knoppen die je niet gebruikt, maak de weergaveknoppen korter tot een naam, een toets of een pictogram, en voeg ze samen tot één groep (**Instellingen → Werkbalk**). Verborgen knoppen houden hun toets en blijven in het **☰**-menu. [Details](use.md#toolbar-buttons). |
 | **Prettig in gebruik** | Camera zoals in een slicer, slepen en neerzetten, recente bestanden, schermafbeeldingen. |
 
 <table>

diff --git a/docs/screenshot-3mf--ember.webp b/docs/screenshot-3mf--ember.webp
diff --git a/docs/screenshot-3mf--light.webp b/docs/screenshot-3mf--light.webp
diff --git a/docs/screenshot-3mf.png b/docs/screenshot-3mf.png
diff --git a/docs/screenshot-arabic--ember.webp b/docs/screenshot-arabic--ember.webp
diff --git a/docs/screenshot-arabic--light.webp b/docs/screenshot-arabic--light.webp
diff --git a/docs/screenshot-arabic.png b/docs/screenshot-arabic.png
diff --git a/docs/screenshot-freecad-preview.png b/docs/screenshot-freecad-preview.png
diff --git a/docs/screenshot-gcode--ember.webp b/docs/screenshot-gcode--ember.webp
diff --git a/docs/screenshot-gcode--light.webp b/docs/screenshot-gcode--light.webp
diff --git a/docs/screenshot-gcode.png b/docs/screenshot-gcode.png
diff --git a/docs/screenshot-layer--ember.webp b/docs/screenshot-layer--ember.webp
diff --git a/docs/screenshot-layer--light.webp b/docs/screenshot-layer--light.webp
diff --git a/docs/screenshot-layer.png b/docs/screenshot-layer.png
diff --git a/docs/screenshot-model--ember.webp b/docs/screenshot-model--ember.webp
diff --git a/docs/screenshot-model--light.webp b/docs/screenshot-model--light.webp
diff --git a/docs/screenshot-model.png b/docs/screenshot-model.png
diff --git a/docs/screenshot-settings--ember.webp b/docs/screenshot-settings--ember.webp
diff --git a/docs/screenshot-settings--light.webp b/docs/screenshot-settings--light.webp
diff --git a/docs/screenshot-settings.png b/docs/screenshot-settings.png
diff --git a/docs/screenshot-slicer-menu--ember.webp b/docs/screenshot-slicer-menu--ember.webp
diff --git a/docs/screenshot-slicer-menu--light.webp b/docs/screenshot-slicer-menu--light.webp
diff --git a/docs/screenshot-slicer-menu.png b/docs/screenshot-slicer-menu.png
diff --git a/docs/screenshot-theme-graphite.png b/docs/screenshot-theme-graphite.png
diff --git a/docs/screenshot-theme-gray.png b/docs/screenshot-theme-gray.png
diff --git a/docs/screenshot-theme-light.png b/docs/screenshot-theme-light.png
diff --git a/docs/screenshot-theme-menu.png b/docs/screenshot-theme-menu.png
diff --git a/docs/screenshot-themes.png b/docs/screenshot-themes.png
diff --git a/docs/screenshot-updates--ember.webp b/docs/screenshot-updates--ember.webp
diff --git a/docs/screenshot-updates--light.webp b/docs/screenshot-updates--light.webp
diff --git a/docs/screenshot-updates.png b/docs/screenshot-updates.png