Issues

• Inconsistent screw placement depth on XY joint to rail mounting (Gantry/X Axis/XY Joint Left & Right)

  CAD
  VoronDesign/Voron-0#364 · Filter by author SnoWFLakE0s opened on Apr 14, 2025

• Spacer modeling inconsistency - Left XY joint

  CAD
  VoronDesign/Voron-0#363 · Filter by author SnoWFLakE0s opened on Apr 14, 2025

• Manual suggestion : idler cam lock reinstallation

  VoronDesign/Voron-0#362 · Filter by author louisrousseau opened on Jan 26, 2025
  1

• Bad screw length official support of no drop nut ?

  VoronDesign/Voron-0#356 · Filter by author Carlsans opened on Jul 26, 2024
  2

• Suggestion: Make the CAD tophat a 100mm tophat

  low priority
  VoronDesign/Voron-0#355 · Filter by author Kagee opened on Jul 25, 2024

• [SUGGESTION] A/B_Drive_Frame_Upper improve for iFixit tool

  low priority
  VoronDesign/Voron-0#351 · Filter by author Scootworks opened on May 26, 2024

• Kyleisah RUINED the V0.2 CAD!!!!!!!

  VoronDesign/Voron-0#349 · Filter by author kyleisah opened on May 1, 2024
  1

• Guidler upgrade proposal

  VoronDesign/Voron-0#348 · Filter by author Matszwe02 opened on Apr 19, 2024
  9

• Need easier way of accessing extruder grubscrew

  VoronDesign/Voron-0#347 · Filter by author ccfman2004 opened on Apr 16, 2024
  2

• Distance between Lower Stain Relief Body Screws and Top A/B Mounts too small to account for compounding tolerances

  VoronDesign/Voron-0#315 · Filter by author ChaosBlades opened on Aug 8, 2023
  2

• Change assembly manual - let Z motor be assembled earlier

  Manual
  VoronDesign/Voron-0#302 · Filter by author Matszwe02 opened on Jun 20, 2023
  2

• panel mounts STLs for other thickness like V0.1 .. 2mm would be very nice

  VoronDesign/Voron-0#270 · Filter by author d0m1n1qu3 opened on Apr 12, 2023
  1

• 30mm blower fans sensitive to the hotend heat and stops working

  VoronDesign/Voron-0#121 · Filter by author bmgoncu opened on Aug 22, 2021
  32